Displaying 1 - 3 of 3 in copyrolysis (remove filter)
CEST Proceedings are published under the ISSN 2944-9820.
Pyrolysis of Waste Plastic Laminates and Coconut Husk: Optimization of Fuel Oil Yield, Higher Heating Value and Energy Value
(Corresponding) Olalo J., Rollon A., Reyes J.
Topic:
Solid waste management
Operating parameters such as percentage composition, process temperature, and particle size affects the outcome of the co-pyrolysis of coconut husk and plastic laminates. Highest yield of 31.17% occurred at 600oC, 5cm particle size and 32% of coconut husk. The corresponding energy value was 1.89688...Read more
Co-Pyrolysis of Plastic Wastes: Effects of Temperature and Feedstock Ratio on Chemical Composition of Liquid Product
(Corresponding) Özçakır G., Karaduman A.
Topic:
Solid waste management
Co-Pyrolysis of Low Density Polyethylene (LDPE) and Polystyrene (PS) was carried out in a semi-batch glass reactor system. Effects of temperature and feedstock ratio on pyrolytic product yields (gaseous, liquid and solid residue) and chemical composition of the liquid were investigated. All...Read more
Keywords:
Polystyrene, Polyethylene, Co-Pyrolysis, Chemical recycling, Plastic waste management
Co-Pyrolysis of Corn Stover with Plastic: Optimization Based on Synergy
(Corresponding) Salvilla J., Rollon A., De Luna M.
Topic:
Environmental biotechnology and bioenergy
The co-pyrolysis of lignocellulosic wastes such as Corn stover with plastic has been found to improve the both the yield and quality of pyrolysis oil and gas products. In this study, the co-pyrolysis of Corn stover (CS) with plastic (LDPE, and PP) were studied through thermogravimetric analysis...Read more
