(Corresponding) Innocenzi V., Prisciandaro M., Vegliò F.
Topic:
Advanced oxidation processes
In the present work, the potentiality of the hydrodynamic cavitation (HC) for the degradation of organic pollutants from industrial effluents has been studied. Cavitation is a phenomenon of formation, growth, collapse of microbubbles or cavities, in a few milli- to microseconds and releases large...Read more
Tuning of an advanced control system on a membrane process for tannery wastewater purification and chromium recovery purposes
Marchetti A., (Corresponding) Stoller M.
Topic:
Wastewater treatment
Tannery wastewater represent a hazard to the environment due to its high content of chromium. Conventional methods to purify this wastewater stream are available, but not capable to recover back chromium to the tannery process. Membranes appears to be a promising technology to achieve both targets...Read more
Keywords:
wastewater treatment, membranes, simulation, adaptive, predective, control system, fouling
Evaluation of innovative water treatments at molecular level based on high resolution mass spectrometry and advanced statistical tools
(Corresponding) Gago-Ferrero P., ALYGIZAKIS N., Velo-Gala I., Sbardella L., Gernjak W., Petrovic M.
Topic:
Emerging pollutants
This work aims at integrating the last advances in high resolution mass spectrometry (HRMS) and statistical analysis to develop and optimize a smart methodology (workflow) for the assessment of the performance of innovative water treatments using different technological approaches based on advanced...Read more
Keywords:
HRMS, water treatment, emerging pollutants, advanced oxidation processes
The Effect of Different Parameters on Electrochemical Removal of Ampicillin Using New Generation Sn/Sb/Ni-Ti Anodes
(Corresponding) Kurt A., (Corresponding) Yonar T., Shakir F., Helvacıoğlu H., Neşelen E.
Topic:
Advanced oxidation processes
In this study, it was aimed to investigate the feasibility of new generation and stable Sn/Sb/Ni-Ti anodes for treatment of wastewater containing Ampicillin (AMP) antibiotic by electrochemical oxidation processes. Ampicillin concentration was 0.05 g L-1 in the aqueous solution. Residual ampicillin...Read more
Keywords:
Sn/Sb/Ni-Ti anodes, electrochemical oxidation, ampicillin, wastewater treatment, anode production
Combined use of anaerobic and aerobic moving bed biofilm reactors for micropollutants’ removal from wastewater
Kora E., Theodorelou D., Herpich A., Gatidou G., Fountoulakis M., (Corresponding) Stasinakis A.
Topic:
Emerging pollutants
A novel laboratory-scale continuous flow wastewater treatment system, consisting of an anaerobic moving bed biofilm reactor (AnMBBR) and an aerobic MBBR, was used for investigating the removal of hydroxybenzothiazole (OH-BTH) and selected benzotriazoles from municipal wastewater. The system was...Read more
Use of the microalgae Chlorella Sorokiniana for municipal wastewater treatment: batch experiments
Kotoula D., Iliopoulou A., Irakleous-Palaiologou E., Gatidou G., Aloupi M., Fountoulakis M., (Corresponding) Stasinakis A.
Topic:
Wastewater treatment
Batch experiments were conducted in order to investigate the use of microalgae Chlorella sorokiniana for the treatment of different types of municipal wastewater (raw sewage, anaerobically treated wastewater, aerobically treated wastewater) and investigate the role of light and addition of ammonium...Read more
Feasibility of combined anaerobic-aerobic system for textile wastewater contained C. I. Acid Red 88 dye treatment: HRT effects and functional resilience
(Corresponding) Gadow S., Li Y.
Topic:
Wastewater treatment
An integrated continuous anaerobic–aerobic system has been employed as the treatment for synthetic textile wastewater contained C. I. Acid Red 88 dye. A laboratory scale of upflow anaerobic sludge bed (UASB) flowed by activated treatment was operated at hydraulic residence time (HRT) of 24, 12, 6,...Read more
Keywords:
UASB; Aerobic Treatment; C. I. Acid Red 88 dye; HRT; continuous mode
Current state and challenges in WEEE recycling industry in Serbia - case study
(Corresponding) Berežni I., Batinić B., Stanisavljević N., Marinković T.
Topic:
Electric and electronic waste
Waste from electrical and electronic equipment (WEEE) is defined as a special waste flow due to the fact that it contains hazardous materials and should not be mixed and treat with other waste streams. In order to ensure adequate environmental protection and proper management of this waste flow,...Read more
Influence of microbial fuel cell integration on organic matter and nutrient removal in a constructed wetland for wastewater treatment
(Corresponding) Gonzalez T., Miranda J., Vidal G.
Topic:
Wastewater treatment
The combination of constructed wetlands (CWs) and microbial fuel cells (MFCs) has emerged in recent years with the purpose of enhancing wastewater treatment efficiency of CWs while simultaneously generating electricity. Taking the above into account, the aim of this study is to evaluate the...Read more
Cavitation based Advanced Oxidation Processes for Wastewater Treatment – comparison of hydrodynamic and sonocavitation systems
(Corresponding) Boczkaj G., Gągol M., Fedorov K., Cako E.
Topic:
Advanced oxidation processes
Cavitation based advanced oxidation processes (AOPs), are a promising alternative to currently used wastewater treatment technologies [1-2]. Amplified interest in this “hot” topic results in increased number of research on several aspects relating to formation of cavitation phenomena and its...Read more
