(Corresponding) Innocenzi V., Prisciandaro M., Vegliò F.
Topic:
Advanced oxidation processes
In the present work, the potentiality of the hydrodynamic cavitation (HC) for the degradation of organic pollutants from industrial effluents has been studied. Cavitation is a phenomenon of formation, growth, collapse of microbubbles or cavities, in a few milli- to microseconds and releases large...Read more
The Effect of Different Parameters on Electrochemical Removal of Ampicillin Using New Generation Sn/Sb/Ni-Ti Anodes
(Corresponding) Kurt A., (Corresponding) Yonar T., Shakir F., Helvacıoğlu H., Neşelen E.
Topic:
Advanced oxidation processes
In this study, it was aimed to investigate the feasibility of new generation and stable Sn/Sb/Ni-Ti anodes for treatment of wastewater containing Ampicillin (AMP) antibiotic by electrochemical oxidation processes. Ampicillin concentration was 0.05 g L-1 in the aqueous solution. Residual ampicillin...Read more
Keywords:
Sn/Sb/Ni-Ti anodes, electrochemical oxidation, ampicillin, wastewater treatment, anode production
Elimination of relevant pharmaceuticals in hospital wastewater from Colombia by combination of a biological system with a sonochemical process
(Corresponding) TORRES PALMA R., Serna-Galvis E., Silva-Agredo J.
Topic:
Advanced oxidation processes
This work presents the treatment of selected emerging concern pharmaceuticals in real hospital wastewater (HWW) from Tumaco-Colombia by combination of a biological system with a sonochemical process. Fifteen compounds, commonly present in HWW, were considered: acetaminophen, diclofenac,...Read more
New pillared clays for the removal of pollutants from wastewater by treatment with oxidation processes
(Corresponding) Kalmakhanova M., Massalimova B., Diaz de Tuesta J., Gomes H.
Topic:
Advanced oxidation processes
The constant development of technological processes aggravates the problem of pollution, due to a significant change in the composition of effluents that makes necessary the development of new (and/or improvement of the existing) treatment methods and catalytic materials. In this sense, the use of...Read more
Application of carbon-based catalysts derived from compost on catalytic wet peroxide oxidation of leachate waters from mechanical and biological treatment plant units for municipal solid waste
Batista G., (Corresponding) Roman F., Diaz de Tuesta J., Mambrini R., Gomes H.
Topic:
Advanced oxidation processes
This work aims at the valorization of compost from mechanical and biological treatment (MBT) units of municipal solid waste by their transformation into carbon-based catalysts for further application in the treatment of MBT leachate waters (chemical oxygen demand (COD) = 60.0 g L-1, total organic...Read more
Development of a non-target screening workflow for the evaluation of micropollutants fate during oxidation processes
(Corresponding) Huynh N., Le Roux J., Guyot J., Moilleron R.
Topic:
Emerging pollutants
Non-target screening (NTS) is of great interest for environmental monitoring because it enables the screening of numerous pollutants, including unknown products. However, methods to identify unknowns are still time-consuming and only deal with a limited portion of the signal. The objective of this...Read more
Degradation of refractory compounds in industrial wastewaters by advanced technologies based on electrochemical and photochemical oxidation
Petsi P., Sarasidis V., (Corresponding) Plakas K., Karabelas A.
Topic:
Advanced oxidation processes
Results are presented of a systematic experimental investigation aiming to eliminate refractory organics from industrial effluents, of high and non-biodegradable organic load, by two Advanced Oxidation Processes (AOPs). Bench scale experiments were performed with real wastewater samples collected...Read more
Preliminary Research on Removal of Organic Substances Contained in Wastewater from Plastic Lenses Production
(Corresponding) Umiejewska K., Różycki M.
Topic:
Advanced oxidation processes
More than 80 percent of all eyeglasses worn today have plastic lenses. Plastic lenses made of polycarbonate discs are created through the process of machining which requires the use of a coolant. During the production process, the rotating disc and blade are poured with a mixture of water and...Read more
SELECTED APPLICATIONS of CAVITATION BASED ADVANCED OXIDATION PROCESSES (AOPs) for TREATMENT of WATER and INDUSTRIAL EFFUENTS
Fedorov K., Cako E., (Corresponding) Boczkaj G.
Topic:
Advanced oxidation processes
Cavitation phenomenon was effectively applied for enhancement of Advanced Oxidation Processes (AOPs) effectiveness. Main applications are focused on treatment of water as well as industrial effluents [1-2]. Cavitation phenomenon can be generated in the liquid by intentionally formed differences in...Read more
Ηexavalent chromium reduction in a photocatalytic membrane reactor in the presence of organic acids
(Corresponding) Sarasidis V., Kyriakou E., Plakas K., Karabelas A.
Topic:
Advanced oxidation processes
This study deals with the photocatalytic reduction of carcinogenic hexavalent chromium, encountered in industrial effluents and surface waters, to much less toxic and harmful trivalent form. Experiments were performed in a pilot scale Photocatalytic Membrane Reactor employing titanium dioxide...Read more
